11.品質保證

Quality Warranty

11－1 品質保證范圍

     Scope of quality warranty

僅限于肇慶華鋒電子鋁箔股份有限公司及其下屬企業生產制造并通過正式銷售途徑所提供的產品，作為品質保證的對象。

The scope of quality warranty is restricted to the low and high voltage foil produced and sold by HFCC and their official sales channel.

在肇慶華鋒電子鋁箔股份有限公司及其下屬企業生產制造產品的合格證上，會標明鋁箔的品名、制造編號、鋁箔厚度、面積、重量、產品的檢測參數，以及客戶和公司名稱等信息。

It indicate the foil item,lot No.,production No.,thickness,area,weight,

inspection data,client and company name in the Test Certificate.

11－2 品質保證期限

     Warranty period

品質保證期限限于出廠檢驗報告中所記錄的出廠日起6個月內的產品。

We warrant each lot of product for a period of 6 month from the date of original shipment.

由于客戶的原因，有超過6個月還未使用的產品，請在使用前再次檢驗確認。

If the product were kept more than 6 month after shipment,please re-inspect and confirm before using.

11－3 關于品質保證的事項 

    Others about quality warranty

（1）化成箔的儲存環境，存在誘發產品變質的因素。應當避免陽光直射、有害氣體、氯化物，并保持密封，保管場所要保持常溫和低濕度。

  The storage environment of formed foil may cause chemical reaction.please keep the the foil sealed at low temperature and low humidity storage place,avoiding direct sunlight,harmful gases and chlorides.

（2）化成箔上有針孔、斑點、色調變化、粉末、條紋、折痕等，不影響使用的判定為合格品。

   There may be some pinhole spot,clour difference,powder and other things on the foil surface,which will not affect the use.

（3）請勿向鋁箔上潑水、油、化學藥品等，及裸手摸箔?；刹谝苿舆^程中，盡量保持原包裝狀態，做到小心拿放。

    Do not pour water,oil,chemicals etc. on the alumium foil and do not touch the foil surface with bare hands.please try to keep the original packaging when moving the foil,and handle carefully.

（4）根據電容器的性能要求，請仔細確認所選用的化成箔。

    Please confirm and choose the suitable specification of formed foil according to the feature requirement of capacitors.

11－4 賠償的范圍

    Compensation scope

請客戶務必在收到化成箔后進行IQC的檢驗。         

Please make sure do the incoming process inspection after receiving the formed foil.

不合格產品的退貨處理，僅限于由肇慶華鋒電子鋁箔股份有限公司及其下屬企業制造責任引起的、尚未裁切或尚未變形的產品。

Regarding the unqualified product,we only accept to return the foil sold and manufactured by HFCC or its branch company,and the foil are limited for un slitted foil and original shaped foil.

賠償因運輸碰傷的外圈部分或邊緣部分。

The outer part or edges part of formed  foil damaged in the transport are in our compensation scope.

賠償極少數裁切后不能使用的餅狀部分。

Very few slitted formed foil cannot be used for capacitors are in our compensation scope.